Send Email
Send SMS
Search
Swiss Engineering Private Limited
Swiss Engineering Private Limited


Injectable Equipments

We are a leading Manufacturer of multi column distillation plant, pure steam generator, fuilly automatic rectangular autoclave, sliding door type autoclave, dry heat sterilizer and injectable vessel from Mumbai, India.

Multi Column Distillation Plant

REQUEST CALLBACK

Multi Column Distillation Plant
  • Multi Column Distillation Plant
  • Multi Column Distillation Plant
  • Multi Column Distillation Plant
  • +6 Multi Column Distillation Plant
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Automatic GradeSemi-Automatic
Capacity50 Ltrs/Hr. to 5000 Ltrs/Hr
MaterialStainless Steel
BrandSwiss
Frequency50 - 60 Hz
Power SourceElectric
Surface FinishingPolished
Voltage220 - 440 V
Material GradeAISI SS 316/316L and AISI SS 304

“Swiss” Multi Column Distillation Plant is a key system for Injectable cGMP standard. Multi Column Distillation Plant is the perfect solution for high purity sterile pyrogen free distilled water which meets international standards; including India, British & United states Pharmacopoeia. The vapour with high velocity & under pressure passes over a ‘SPECIALLY DESIGNED SPIRAL BAFFLES’ system which develops tremendous centrifugal force & thus eliminates any chances of pyrogens in the carry over vapours. The Water for Injection (WFI) produced from Multi Column Distillation Plant is according to FINN AQUA Design & it is low maintenance & low operational costs.


Salient Features :
  • To assure WFI quality & increase the life of equipment, inner contact surfaces are electro polished
  • Double tube sheets are constructed in the first column where boiler steam is present
  • Sanitary Triclover fittings are used for quick & easy preventive maintenance
  • All Pipes & Tubes are Seamless as per ASME & BPE stamping with less than 0.5Ra
  • PLC based system for automated operation with all required inter locks & validated logic with skid mounted AISI SS 304 control panel with printing facility
  • All Silicon / PTFE / Viton Gasket are in cGMP Pharma Food Grade
  • High Purity Flow Diversion Valve is provided for protection of WFI water quality
  • Insulation is made with 5cm mineral wool covered by AISI SS 304 sheet
  • Magnetic Control System is provided for first & last column to control Water i.e. high level & low level
  • Distilled water passes through LAL TEST
  • Fast Response to (Distilled water) Demand
Yes! I am interested

Pure Steam Generator

REQUEST CALLBACK

Pure Steam Generator
  • Pure Steam Generator
  • Pure Steam Generator
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
BrandSwiss
MaterialStainless Steel
Voltage220 - 440 V
Material GradeAISI SS 316 / AISI SS 316L and AISI SS 304
Surface FinishingPolished
Frequency50 - 60 Hz
Capacitiy100 Ltrs. /Hr. to 1500 Ltrs. /Hr.

“Swiss” Pure Steam Generator is a key system for pyrogen free cleaning cGMP Standard. Pure Steam Generator is the perfect solutions for high purity sterile pyrogen free cleaning system, which meets international Standard including India, British, and United States Pharmacopoeia. The Vapour with high velocity and under pressure passes over a specially designed spiral Baffle System which develops Tremendous Centrifugal Force and thus Eliminates any Changes of pyrogens in the carry over Vapours. The Pure Steam Generator is Widely used in Medical Field, Biochemical, Piping, Tank and Sterilization. The Pure Steam Produced from PSG is According to “FINN AQUA” Design and it is low Maintenance and low Operational Costs.

Salient Features :
  • To assure High Purity Steam quality & increase the life of equipment – Inner Contact Surfaces are electro polished.
  • Double Tube Sheets is constructed in the first column where boiler steam is present.
  • Sanitary Triclover fittings are used for quick & easy preventive maintenance.
  • All Pipes & Tubes are Seamless as per ASME & BPE stamping with less than 0.5Ra
  • All Silicon / PTFE / Viton Gasket are in cGMP Pharma Food Grade.
  • PLC based system for automated operation with all required inter locks & validated logic with skid mounted AISI SS 304 control panel with printing facility.
  • High Purity Flow Diversion Valve is provided for protection of High Purity Steam Quality.
  • Insulation is made with 5 cm Mineral Wool covered by AISI 304 SS Sheet.
  • Magnetic Control System is provided for first column to control water i.e. high level & low level.
  • Specially designed to produce sterile & pyrogen free Steam @ 2.5 – 3kg/cm² (143°C).
  • Sterile steam passes through LAL TEST.
  • Fast response to (Pure Steam) demand

Yes! I am interested

Fuilly Automatic Rectangular Autoclave

REQUEST CALLBACK

Fuilly Automatic Rectangular Autoclave
  • Fuilly Automatic Rectangular Autoclave
  • Fuilly Automatic Rectangular Autoclave
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Automation GradeFully Automatic
BrandSwiss
MaterialStainless Steel
Frequency50 - 60 Hz
Voltage220 - 440 V
Surface FinishPolished
Power SourceElectric

“Swiss” Research & Development efforts resulted in good quality product with excellent and precise process control as per needs of customer and their level of satisfaction. Steam Sterilizers are available in different models and for the suitable applications :
  • Horizontal Cylindrical Sterilizers (Microbiology Lab) with Conventional radial arm.
  • Horizontal Rectangular Sterilizers (Microbiology Lab) with Conventional radial arm and also with Fully Automatic Sliding Doors.


Salient Features :
  • All Contact Parts are in AISI SS 316 / AISI SS 316L and Non-Contact Parts are in AISI SS 304.
  • Sterilization is a critical part of the Manufacturing Process.
  • All Contact Parts are in AISI SS 316/316L and Non-Contact Parts are in AISI SS 304.
  • All Silicon / PTFE / Viton Gasket are in cGMP Pharma Food Grade.
  • Sanitary Triclover Fittings are used for quick and easy Preventive Maintenance.
  • Swiss Design As per ASME and cGMP Standard.
  • Swiss Care: No Stagnant Point in Internal Surfaces.
  • Fast Response to (Sterile Product) Demand.
  • Sterilization as a Process is Governed by Stringent conditions and Standards set by regulating authorities and Pharmacopeia’s.
  • “Swiss” Sterilization system offer a wide range of Process Flexibility suited to customer requirements and are delivered as customized solutions.
  • Single / Double Hinged doors with high temperature resistant silicon food grade gaskets.
  • All Sizes in rectangular or cylindrical chambers available.
  • Standard cycles, HPHV cycles, Bowie Dick cycle & leak test cycle.
  • Fully Automatic P.L.C based control system covering all parameters with facility for printing. Manual maintenance mode independent to P.L.C.
  • Confirming to various international specifications. Complete cGMP models.
  • Guaranteed precise chamber temperature control with temperature uniformity as per EN554 & HTM2010.
  • On line printing & recording confirming to 21 CFR PART11.
  • “Swiss” designed chamber to ensure complete condensate removal.
  • “Swiss” designed connector / nozzles sanitary type to avoid any chances of contamination.
  • Special welding technique to avoid welding depressions inside chamber.
  • Excellent chamber finish with crevice free construction to avoid chances of contamination.
  • The Trolley designed is such that the loaded trolley can be pulled out easily with Swiss Specially designed high Temperature Heavy Duty Castor.
Yes! I am interested

Sliding Door Type Autoclave

REQUEST CALLBACK

Sliding Door Type Autoclave
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
BrandSwiss
Automation GradeFully Automatic
MaterialStainless Steel
Voltage440 V
Frequency50 - 60 Hz
PhaseThree Phase
Surface FinishPolished

In order to keep pace with the never-ending demands of customers, we are involved in offering a wide range of Sliding Door Type Autoclave.
Yes! I am interested

Dry Heat Sterilizer

REQUEST CALLBACK

Dry Heat Sterilizer
  • Dry Heat Sterilizer
  • Dry Heat Sterilizer
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
BrandSwiss
Type of SterilizerDry Heat Sterilizer
Automation GradeFully Automatic
Temperature RangeMore Than 150 to 300 Deg C
MaterialStainless Steel
Surface FinishingPolished
Material GradeAISI SS 316,SS316L,SS304
Voltage220 - 440 V
Frequency50 - 60 Hz

“Swiss” Research and Development efforts Resulted in good Quality Product with Excellent and precise process control as per needs of Customer and their level of Satisfaction “Swiss” Dry Heat Sterilizer are mainly used for sterilizing and Depyrogenizing glass and metal ware including ampoules, injection bottles, infusion bottles and production Equipments. This Stainless steel Dry Heat Sterilizer use dry heat and are better than the steam sterilizer in the sense that the process does not corrode the Machine. The process completely destructs all micro organisms and does not cause any Environmental Pollution. The Different Cycles of DHS includes Exhaust Cycle, Presterlization, Sterilization, Stabilization; cooling cycles, can with stand.

Salient Features :

  • Complete one Piece Seamless Construction.
  • Hepa Filter can be fitted inside and outside. The temperature variation inside the chamber will not be more than 5°C (Hottest Point & Coldest point).
  • The Trolley designed is such that the loaded trolley can be pulled out easily with Swiss Specially designed high Temperature Heavy Duty Castor wheels. (Thrust Construction)
  • Black particle generation is totally eradicated with the appropriate design of the heater bank, which is externally removable for maintenance saving time and energy.
  • Total Unit is made as per Schedule M?? & WHO.
  • AISI SS 316 Chamber and Outer AISI SS 304 with complete cGMP Model
  • Double door with special diagonally tightening lock & sealing system with PLC Control Pneumatic Locking Automatically.
  • Special D Type Pharma Food Grade cGMP Silicon Soft Gasket for high temperature air sealing door.
  • AISI SS 316/316L Incolloy tubular Air heater ISO Make
  • Specially designed statically & dynamically balanced blower of suitable capacity is mounted externally for air circulation with Hepa Filter.
  • Hepa Pressure module provided in air suction line.
  • Inlet / Outlet damper valve are pneumatically operated & controlled by PLC Panel.
  • PLC based control panel with 8 to 16 Point PT 100 temperature probe.
  • Special Arrangement of baffles is made for the rapid uniform distribution of air inside the chamber.
  • No black particle generates in the chamber due to install of high temperature Hepa Filter in inner chamber.
  • Self locking safety for doors cant open under pressure.
  • Insulation is made with 12.5cm mineral wool covered by AISI SS 304 Sheet
  • Special air flow technique ensures over pressure throught the cycle for 100% Sterile Integrity.
  • Swiss Care: No Stagnant Point in Internal Surfaces
  • Swiss Design As per ASME and cGMP Standard.
  • Fast Response to (Sterile Product) Demand
Yes! I am interested

Injectable Vessel

REQUEST CALLBACK

Injectable Vessel
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
BrandSwiss
Material GradeAISI SS 316/316L
MaterialStainless Steel
OrientationVertical
Finishing TypePolished
ApplicationIndustrial

“Swiss” Sterile Manufacturing Vessel is a Key System for Injectable cGMP Standard. Sterile Manufacturing vessel is the Perfect solution of High Purity quality as per WHO and US FDA Standard to Manufacturing Sterile product solution. “Swiss Design” It is Low Maintenance and Low Operational costs. This is a completely closed vessel with agitator mounted on top dome / bottom entry. The Vessel will be available with different Accessories for different different applications i.e. standard stirrer, magnetic stirrer as required by the customers.


Salient Features :
  • Sterile Manufacturing Vessel as per ASME code and cGMP Standard.
  • All Contact Parts are in AISI SS 316/316L and Non-Contact Parts are in AISI SS 304.
  • Swiss Care: No Stagnant Point in Internal Surfaces.
  • The vessel will be Steam Jackated and Insulated AISI SS 304 sheet.
  • Insulation is made with 5cm Mineral wool covered by AISI SS 304 Sheet.
  • Swiss Make High Purity Spray ball for CIP/SIP System.
  • Swiss make High Purity Flush bottom valve.
  • Steam / Electrical Heating.
  • Sanitary Triclover Fittings are used for quick and easy Preventive Maintenance.
  • All Pipes & Tubes are Seamless as per ASME & BPE stamping with less than 0.5Ra.
  • Fast Response to (Sterile Manufacturing Product) Demand.
  • All silicon / PTFE / Viton Gasket are in cGMP Pharma Food Grade.
  • Special welding technique to avoid welding depressions inside chamber.
  • Air vent Filter.
  • Magnetic Control High Level, Medium Level and Low Level.
Yes! I am interested

Bung Washing Machine

REQUEST CALLBACK

Bung Washing Machine
  • Bung Washing Machine
  • Bung Washing Machine
  • Bung Washing Machine
  • Bung Washing Machine
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
BrandSwiss
Voltage220 - 440 V
MaterialStainless Steel
Power SourceElectric
Material GradeSS316, SS316L
FinishPolish

“Swiss” Bung Washing Machine is suitable for washing of rubber / latex stoppers for vials and bottles. Unit consists of outer container of AISI SS 316 with overflow through. Inner product holder is an AISI SS 304 perforated basket. The basket is then put in the outer container, washing water flows from a centrally located AISI SS 316 Pipe. Filtered compressed air is passed through specially designed sparger pipe which generates a highly velocity flow pattern and fluidizes the rubber stoppers.The water in the container can be heated if required, by an electric heater or a steam coil provided. After each wash-cycle quick draining possible with 1½” drain valve. All contact parts are made out of AISI SS 316 quality.

Salient Features :
  • Bung washing is a Critical part of the cleaning Process.
  • All Contact Parts are in AISI SS 316/316L and Non-Contact Parts are in AISI SS 304.
  • All Silicon / PTFE / Viton Gasket are in cGMP Pharma Food Grade.
  • Sanitary Triclover Fittings are used for quick and easy Preventive Maintenance.
  • Swiss Design As per ASME and cGMP Standard.
  • Swiss Care: No Stagnant Point in Internal Surfaces.
  • Fast Response to (bung cleaning) Demand.
  • Special welding technique to avoid welding depressions inside chamber.
  • The basket can be removed manually and bungs will be loaded in the baskets manually.
  • Thermo Statical control.
Yes! I am interested

Filling Vessel

REQUEST CALLBACK

Filling Vessel
  • Filling Vessel
  • Filling Vessel
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
MaterialStainless Steel
BrandSwiss
Capacity5 to 500 litres
Material GradeAISI SS 316 / 316L
Surface FinishPolished
No of Wheels4

“Swiss” Filling vessels are used in the Membrane filtration system. While pressure vessels are used to transfer the product to the filter under Nitrogen pressure, the filling vessels are used to collect the filtered sterile solution. They work as buffer vessels in the product filling room. Extreme care is taken to provide smooth interior and exterior surfaces.

Salient Features :
  • Filling vessel is a Critical part of the manufacturing Process.
  • All Contact Parts are in AISI SS 316/316L and Non-Contact Parts are in AISI SS 304.
  • Top Complete with Ring Cover Wing nuts.
  • All Silicon / PTFE / Viton Gasket are in cGMP Pharma Food Grade.
  • 2 Bent outlet Nozzle will be fitted with AISI SS 316 pipe to draw out all the fluid from the Vessel.
  • AISI SS 316/316L Inlet Nozzle for allowing pressurized air.
  • The Vessel will be fitted with one Tuffoon sight Glass.
  • All the welding work will be done by Argon Arc AISI SS 316 to give smooth finish.
  • The Vessel will be Mirror Polished from inside & outside.
  • Sanitary Triclover Fittings are used for quick and easy Preventive Maintenance.
  • Swiss Design As per ASME and cGMP Standard.
  • Special welding technique to avoid welding depressions inside chamber.
  • Swiss Care: No Stagnant Point in Internal Surfaces
Yes! I am interested

Pressure Vessel

REQUEST CALLBACK

Pressure Vessel
  • Pressure Vessel
  • Pressure Vessel
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
MaterialStainless Steel
Capacity5-500 L
BrandSwiss
Material GradeSS316/316L
Voltage220 - 440 V
Finishing TypePolished

“Swiss” Pressure vessels are used in the Membrane filtration system. While pressure vessels are used to transfer the product to the filter under Nitrogen pressure, the filling vessels are used to collect the filtered sterile solution. They work as buffer vessels in the product filling room. Extreme care is taken to provide smooth interior and exterior surfaces.

Salient Features :

  • Pressure vessel is a Critical part of the manufacturing Process.
  • All Contact Parts are in AISI SS 316/316L and Non-Contact Parts are in AISI SS 304.
  • Top Complete with Ring Cover Wing nuts.
  • All Silicon / PTFE / Viton Gasket are in cGMP Pharma Food Grade.
  • 1 Bent outlet Nozzle will be fitted with AISI SS 316/316L pipe to draw out all the fluid from the Vessel.
  • AISI SS 316/316L Inlet with Nozzle for allowing pressurized air.
  • The Vessel will be fitted one Safety Valve with Air Release System.
  • All the welding work will be done by Argon Arc AISI SS 316/316L to give cGMP Pharma finish.
  • The Vessel will be Mirror Polished from inside & outside.
  • Sanitary Triclover Fittings are used for quick and easy Preventive Maintenance.
  • Swiss Design As per ASME and cGMP Standard.
  • Special welding technique to avoid welding depressions inside chamber.
  • Swiss Care: No Stagnant Point in Internal Surfaces .
      Yes! I am interested

      Membrane Filter

      REQUEST CALLBACK

      Membrane Filter
      Ask for Price

      Thanks for Contacting Us.

      Product Price :Get Latest Price

      Product Details:
      MaterialStainless Steel
      SurfacePolished
      Frequency50 - 60 Hz
      Voltage220 - 440 V
      BrandSwiss
      Scale Filter Holders Size142 and 293 mm
      Membrane Filter Holders Diameter47, 90, 142 and 293 mm

      Banking on the skills of our qualified team of professionals, we are involved in providing Membrane Filter.

      These filter holders are used for a sterile grade filtration of Pharmaceutical and Biological solutions. The unit is specially designed to support the membrane against the applied pressure differential.

      Salient Features :

      • All Contact Parts are in AISI SS 316/316L and Non-Contact Parts are in AISI SS 304.
      • Suitable for filtration of sterile liquids.
      • Membrane filter holder is a Critical part of the Filtration Process.
      • All Silicon / PTFE / Viton Gasket are in cGMP Pharma Food Grade.
      • Sanitary Triclover Fittings are used for quick and easy Preventive Maintenance.
      • Swiss Design As per ASME and cGMP Standard.
      • Swiss Care: No Stagnant Point in Internal Surfaces
      • Fast Response to (Filtration) Demand
      • Special welding technique to avoid welding depressions inside chamber.
      • All Components are Argon Arc welded, Outside & Inside mirror Finish.
      • An Air escape valve with Nozzle will also be fitted at Top & Bottom to remove inside air.
      • Inlet & outlet Nozzle will be TC End.
      • Complete one piece Seamless Construction
      Yes! I am interested

      Sterilizing Machine

      REQUEST CALLBACK

      Sterilizing Machine
      Ask for Price

      Thanks for Contacting Us.

      Product Price :Get Latest Price

      Product Details:
      BrandSwiss
      MaterialStainless Steel
      Voltage220 - 440 V
      Material GradeSS 304
      Frequency50 - 60 Hz
      Surface FinishingPolished

      “Swiss” Sterilizing Machine is a key System for Injectable cGMP Standard. Sterility is the perfect solution for high purity Sterile Test which meets international standards; Including India, British & United States Pharmacopoeia. Sterility Test is Available in Single station, three station and six station.

      Salient Features :
      • All Contact Parts are in AISI SS 316/316L and Non-Contact Parts are in AISI SS 304.
      • All Silicon / PTFE / Viton Gasket are in cGMP Pharma Food Grade.
      • Sanitary Fittings are used for quick and easy Preventive Maintenance.
      • Swiss Design As per and cGMP Standard.
      • Swiss Care: No Stagnant Point in Internal Surfaces.
      • Fast Response to (Sterility Test) Demand.
      • Special welding technique to avoid welding depressions inside chamber.
      • Complete one piece Seamless Construction.
      Yes! I am interested

      Vertical Type Cylindrical Autoclave

      REQUEST CALLBACK

      Vertical Type Cylindrical Autoclave
      Ask for Price

      Thanks for Contacting Us.

      Product Price :Get Latest Price

      Product Details:
      Automation GradeFully Automatic
      BrandSwiss
      ShapeVertical
      MaterialStainless Steel
      Voltage380 V
      Frequency50/60 Hz
      FinishPolished

      “Swiss” Research & Development efforts resulted in good quality product with excellent and precise process control as per needs of customer and their level of satisfaction. Steam Sterilizers are available in different models and for the suitable applications:
      • Vertical Sterilizers (Microbiology Lab) with swing doors.

      Salient Features :
      • All Contact Parts are in AISI SS 316 / AISI SS 316L and Non-Contact Parts are in AISI SS 304.
      • Sterilization is a critical part of the Manufacturing Process.
      • All Contact Parts are in AISI SS 316/316L and Non-Contact Parts are in AISI SS 304.
      • All Silicon / PTFE / Viton Gasket are in cGMP Pharma Food Grade.
      • Sanitary Triclover Fittings are used for quick and easy Preventive Maintenance.
      • Swiss Design As per ASME and cGMP Standard.
      • Swiss Care: No Stagnant Point in Internal Surfaces.
      • Fast Response to (Sterile Product) Demand.
      • Sterilization as a Process is Governed by Stringent conditions and Standards set by regulating authorities and Pharmacopeia’s.
      • “Swiss” Sterilization system offer a wide range of Process Flexibility suited to customer requirements and are delivered as customized solutions.
      • Single / Double Hinged doors with high temperature resistant silicon food grade gaskets.
      • All Sizes in rectangular or cylindrical chambers available.
      • Standard cycles, HPHV cycles, Bowie Dick cycle & leak test cycle.
      • Fully Automatic P.L.C based control system covering all parameters with facility for printing. Manual maintenance mode independent to P.L.C.
      • Confirming to various international specifications. Complete cGMP models.
      • Guaranteed precise chamber temperature control with temperature uniformity as per EN554 & HTM2010.
      • On line printing & recording confirming to 21 CFR PART11.
      • “Swiss” designed chamber to ensure complete condensate removal.
      • “Swiss” designed connector / nozzles sanitary type to avoid any chances of contamination.
      • Special welding technique to avoid welding depressions inside chamber.
      • Excellent chamber finish with crevice free construction to avoid chances of contamination.
      • The Trolley designed is such that the loaded trolley can be pulled out easily with Swiss Specially designed high Temperature Heavy Duty Castor.
      Yes! I am interested

      WFI Tank

      REQUEST CALLBACK

      WFI Tank
      • WFI Tank
      • WFI Tank
      Ask for Price

      Thanks for Contacting Us.

      Product Price :Get Latest Price

      Product Details:
      MaterialStainless Steel
      Steel GradeSS304, SS316, SS316L
      BrandSwiss
      Capacity1 - 100 L
      Surface FinishPolished

      “Swiss” Water For Injection Tank Manufactured as per ASME/cGMP Standard is available in Vertical / Horizontal Jackated and non-Jacketed design. (If WFI is to be stored for a longer Period then it is essential to maintain the temperature of Stored WFI at 80°C) “Swiss” Manufactures WFI Storage Tank with Steam Jacketed or Electrical Jacketed or without jacketed bobbin Type Heating Design .


      Salient Features :
      • All Silicon / PTFE / Viton Gasket are in cGMP Pharma Food Grade
      • Sanitary Triclover Fittings are used for quick and easy Preventive Maintenance.
      • Swiss Design As per ASME and cGMP Standard.
      • Fast Response to (Distilled water Storage) Demand.
      • Special welding technique to avoid welding depressions inside chamber.
      • WFI tank design as per the client Requirement
      • “Swiss” care: No Stagnant Point to avoid bacterial growth.
      • WFI tank, all contact part will be Electropolished to the Ra valve of 0.28
      • WFI tank outside finish as per client requirement, mirror finish / mat finish.
      • Insulation is made with 5cm mineral wool Covered by AISI SS 304 sheet Argon Arc welded Cladding
      • Swiss provided sanitary type spray ball for CIP and SIP System.
      • Water for Injection vessel is a Critical part of the manufacturing Process.
      • AISI SS 304 Control panel provided with level indication and digital temperature cum controller.
      • WFI tank provided with high Purity Flush Bottom Valve.
      • 0.2 micron air vent Filter with AISI SS 316L Filter housing “Swiss Make”
      • High level, Medium level and Low Level.

       

        Yes! I am interested

         
        X


        Explore More Products

        Contact via E-mail
        Contact via SMS
        Swiss Engineering Private Limited
        Hetal Shah (Director)
        Swiss House, Building No. 3, Rajprabha Mohan Industrial Estate , Vasai East,
        Mumbai - 401208, Maharashtra, India
        Call Us: 
        Call Response Rate: 44%
        Share Us :
        F G T L



        Home  |   Profile   |  Our Products  |  Site Map  |   Contact Us

        © Swiss Engineering Private Limited. All Rights Reserved (Terms of Use)
        Developed and Managed by IndiaMART InterMESH Limited

        Swiss Engineering Private Limited